Hubei Fotma Machinery Co., Ltd.
Main products:Tractor,Implements,Construction Machinery,Spare Parts,Non-Ferrous Metal
Products
Contact Us
  • Contact Person : Mr. Liu Li
  • Company Name : Hubei Fotma Machinery Co., Ltd.
  • Tel : 86-27-67845266
  • Fax : 86-27-67845262
  • Address : Hubei,Wuhan,Building 3, International Enterprises Center, 2 Te 1# Guanshan Road, Wuchang, Wuhan City, Hubei Province. China
  • Country/Region : China
  • Zip : 430074

Injection Pump Test Bench

Injection Pump Test Bench
Product Detailed
Injection Pump Test Bench,Common type, Digital display, test mechanical in-line & rotary type fuel injection pumps

Injection Pump Test Bench, test stand, 12PSDW Standard type

Features:1. Changing frequency changing rotation speed;2. Small fall of rotation speed and high output torque;3. High measurement precision, Ultra low noise;4. Over voltage, Overload and short circuit protection; 5. Ten kinds of rotation speeds presetting;6. Constant temperature controlled;7. Rotation speed, count, advance angle and temperature are displayed in digits mode, and air pressure is displayed on the mechanical gauge;8. Built-in Air resource;9. Can be operated from both sides.

Functions:1. Measurement of each cylinder's delivery at various rotation speeds2. Checking each cylinder's injection starting position and delivery interval angle3. Checking and adjust the mechanical speed governor.4. Checking and adjusting the distributor pump.5. Checking and adjusting behavior of supercharging and compensatory device. 6. Measurement of the reflux delivery of distributor pumps7. Checking the electromagnetic valve of distributor pumps. (12V/24V)8. Measurement of the distributor pump's body internal pressure.9. Checking the sealing of fuel injection pump body10. Install tube of auto-sucking oil supply can check on oil supply pump. (including VE pump.)11. Measurement of Advance angle

Technical parameters:1. Adjustable rotation speed range: 0~4000 RPM2. Test cylinders: 12.3. Rotation speed presetting: 10 kinds.4. DC. Supply: 12/24V5. Feeding pump motor: 1.1kw6. Series of graduate glass: 45cc, 150cc. The 260cc is optional 7. Volume of oil tank: 60L 8. Main shafts Center height: 125mm 9. Flywheel inertia's moment: 0.8kg.M2, 10. Stoke counting: 50-9999 11. Control temperature of fuel oil (°C): 40+2 12. Feed oil pressure: low pressure 0-0.4MPa, high-pressure 0-4Mpa.      Internal pressure: 0-0.16MPa, 0-1.6MPa.13. Rotation direction of Main shafts: Clockwise or Anticlockwise 14. Packing dimension: Approx. 4.5M3 CBM 15. Packing weight: Approx. 900kg 16. Output power: 5.5kw, 7.5kw, 11kw and 15 kw or on request17. 3-phase power supply: 380v/50hz or on request.

Injection Pump Test Bench



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.