Hubei Fotma Machinery Co., Ltd.
Main products:Tractor,Implements,Construction Machinery,Spare Parts,Non-Ferrous Metal
Products
Contact Us
  • Contact Person : Mr. Liu Li
  • Company Name : Hubei Fotma Machinery Co., Ltd.
  • Tel : 86-27-67845266
  • Fax : 86-27-67845262
  • Address : Hubei,Wuhan,Building 3, International Enterprises Center, 2 Te 1# Guanshan Road, Wuchang, Wuhan City, Hubei Province. China
  • Country/Region : China
  • Zip : 430074

Epoxy/polyester Powder Coating

Epoxy/polyester Powder Coating
Product Detailed
With various RAL color, gloss and pattern Inner packing: Airproof plastic bag N.W.: 20kg G.W.: 25kg Outer packing:Carton

1. IntroductionThis series of products are mainly made of epoxy resin and polyester resin. For they have the double advantages of epoxy powder coating and polyester powder coating, it has the good effects of leveling property, ornamental property, merchanic property and superior corrosion resistance, and is used widely in many fields.2. Uses(1) Home Electrical Appliances: The refrigerator, washing machine, microwave oven, water heater and electric cookeries.(2) Instruments: Spraying on the exterior of instrument and apparatus, Medical equipment and Optical instruments.(3) Light Industry: Lighting lamps Steel furniture and Daily aluminum products, etc. (4) PCM Steel Plate (metal precoated steel plate): it can be widely used in the exterior of household appliances.(5) Others: Books Equipment, Commercial Machinery and Knitting Machinery, etc.3. Product Series We can offer the standard type and low-temperature solidification type powder coating products. We can offer high gloss (86% more than), gloss (76-85%), semi-gloss (50-75%), sub-gloss (20-50%) and non-gloss (under 20%) products. Color shades can be made according to customers requirement.4. Physical PropertiesAppearance: Homogeneous without any agglomerates Specific Gravity: 1.2~1.7 (vary with the different type and color) Flowing ability: 18~35mm PSD: 100% smaller than100um5. Curing ConditionsStandard Type: 180 degrees centigrade  (temperature of work piece) 15 minute Low Temperature Type: 160 degrees centigrade  (temperature of work piece) 15 minute6. Film Performance

Item

Test standard or method

Test index

Impact resistance (fallinghammer method)

ISO6272

GB/T1732-1993

50kg/cm

Erichsen test

ISO1520

GB/T9753-1988

8mm

Adhesion (cross cut)

ISO2409

GB/T9286-1998

0 degree

Bending test

ISO1519

GB/T6742-1986

2mm

Pencil hardness

ASTMD3363

GB/T6739-1996

1H-2H

Salt mist test

ISO7253

GB/T1771-1991

>500H

Heat & moist test

ISO6270

GB/T1740-1979

>1000H

Heat resistance

110degrees centigrade /24H (white)

Superior gloss retention, E≤0.3-0.4

Note

1.The above-mentioned test adopt 0.8mm thick rust removal, degrease cold-rolled stencil plate, and the scribble membrane thickness is 50-70 microns;2.The index of performance applied membrane above may be slightly reduced with reducing of the gloss.

7. Average Coverage Rate9-12 square per kg, membrane thick is 60 μm(calculated as the 100% usage rate)8. Packing Carton packaging, with polyethylene chloride bag, the net weight is 20 kg. 9. Storage The products must be stored in dry room with good ventilation, with temperature lower than 30 degrees centigrade  and should avoid direct sunlight. Prohibit to piling up in the open. Under this condition, the powder can be steadily maintained for one year, expired products still can be used provided testing results meeting the utilization standards.10. Health and Safety This powder coating is a kind of nonpoisonous product; the inhalation of the dusts should be avoided. An operator should wear an anti-dust mask and try best to avoid long-time contact with the powder coatings.

Epoxy/polyester Powder Coating



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.