1100cc buggy

1100cc buggy features: 1. Powerful 1100cc CHERY engine, 40L tank 2. Turbo system 3. Customizable 4. With EEC certificate

1100cc buggy standard features:

1.1100cc 50kw,16V ,fuel injection chery engine with low ratio transmission,

Gear                 New Gear Ratio           

1st -  3.583  old - 3.9091 new ratio

2nd - 2.167 old -  2.800   new ratio

3rd - 1.333  old - 1.800    new ratio

4th -    .900 old - 1.0357  new ratio

2.Reinforced Rear Trailing Arms

3.Seamless steel Lower A-Arms.

4.Adjustable steering wheel.

5.Padded Roll Cage

6.2000lb Rated Winch .

7.Hitch Receptacle on rear.

8. Stainless steel Cylinder Fuel Tank with On-Off Cock (Pressure Tested): You can turn off the fuel supply at any time for the safety.

9. Aluminum Center Console with speedmeter,odometer,water temperature ,kill switch,lights switch. Black Console with 12 volt, Turn Signal Indicator, Headlight indicator and radiator

Compulsive switch.11. Powder Coat. we use a Powdercoat that is for outdoors. No fade ,No run.12. Roll Cage: The roll cage has Three Tubes in front and Two Tubes in rear.

13. Stronger CV Joints and Axles. The axles and CV joints are made from 40CrMo and hardened to RC 38 to 42 . 

14. On our new model go karts we ran two tubes in the middle of the frame from front to back. We run all our brakes lines, throttle cable and all wires between these two tubes. We use a 3" wide x 1" high C-channel made from Alluminum. Use foam under Diamond Plate to stop noise from panels. Use a rubber grommet for holes in Diamond plate to stop wires from getting cut.15. The ECU for engine is mounted on the firewall between seats. It is waterproof and dustproof.

16.Wires do not touch exhaust. It is out of the weather and waterproof.

17.Engine puller cover

18. cigaretter lighter  

19.Available:blue ,yellow,red,black ,white.

20, plastic fenders ,front and back.

21.waterproof ceiling.

22.stainless steel muffler.(EEC standard)

23.Five Point Harness for each seat.(standard feature)

24. windshield for EEC.(standart feaute )

25.Reinforced Billet Passenger Footrest. (standard feature)

26. Fully enclosed cockpit with Diamond Plate F.loor and Firewall, Aluminum side panel and protection panel , no entry water ,dirt. Diamond Plate from front to rear (under seats). Diamond Plate Firewall (protective trim strip on top of panel to stop seat from getting damaged from sharp edge.  All Diamond plates have noise suppression installed to eliminate vibration or resonance from motor. Rubber weather-stripping installed under all panels to stop vibration (between tube and panel) Fully enclosed cockpit

27.Improved Wire Harness with Central Fuse Box (10-14 gage wire) 

28.The Frame, Rear Trailing-Arms and A-Arms is made of DOM 1020 tubing with a 1.250” diameter and .095 wall thickness.

29.Jamar Gas Pedal (We install in the USA for CVT Models) （Jamar Gas Pedal）

30.100 watt halogen lights with high-low beam

31.A Diamond Plate cover will be installed over channel after brake lines and wiring is installed. Wiring and brake lines will be in a channel  in middle of sandrail.

 

Options:

Turbo system

Radiator with dual fan

Racing seat

Complete roll cage

Gas shock absorber with bottle

1300cc Chery engine

1100cc buggy